products / Verniciatura

Industrial Static Oven




Optional: - Heating through the use of electrical resistances instead of a modulating burner
- Customized design and manufacturing according to finishing systems and plants requirements

products / Verniciatura

Industrial Static Oven

FIXED TEMPERATURE | EASILY ASSEMBLED | CUSTOMIZED DESIGN

The industrial static oven is made of galvanized sheet metal panels, both inside and outside. The thermal insulation is obtained by inserting a special insulating material design with the proper thickness to guarantee the highest thermal performance, as to minimize utility consumption.

The static oven includes one or two doors realized with special high-temperature seals and manual closure with lever bolts.

The thermal exchange is very efficient because the entire airflow is sucked within the heat generator and then properly distributed on the overall lateral wall of the oven. Then, the airflow is sucked on the other lateral wall, which is equipped with tuning gates to control the airflow aspiration, so to keep the desired inside temperature steady.

The thermal power is guaranteed by an LPG or methane gas modulating burner, installed within a high-temperature resistant room containing electrical fans to facilitate air circulation.

The modulating burner and ventilation group are installed on one side of the oven to guarantee easier assembling and maintenance operations.

The temperature controls act directly on the modulating burner. The oven temperature control acts dependently on the desired working temperature chosen, it commands the burner from minimum to maximum flame stage keeping the temperature constant.

In case the temperature drops the second flame starts, while if the temperature increases the flame is turned off. The same concept is applied, with different temperature, to the combustion chamber; thus avoiding frequent thermal stress and abnormal temperature within the chamber.


Optional: - Heating through the use of electrical resistances instead of a modulating burner
- Customized design and manufacturing according to finishing systems and plants requirements

suitable for: Wood Metals Plastic

Request information